Encaustic writing, or encaustic medium, as it is called, can be bought already tempered with resin, or you can make it yourself with two ingredients. The essay of encaustic writing by an essay writing service has stood the test of time. To make encaustic medium, combine the ingredients by melting 9 lbs. of pure filtered beeswax with 2 lbs. of damar resin crystals, which are hardened sap from a fir tree that grows in Malaysia.
The damar resin can be bought online for mixing with filtered beeswax. Damar makes the encaustic medium harder and therefore less likely to scratch, or to produce bloom when the encaustic is exposed to cold temperatures. You will also need encaustic pigment, which is sold in sticks or cakes of concentrated colors; paraffin to clean your brushes with; some natural hair bristle writing brushes; a heat gun; and a substrate to writing on, such as wood panels.
Do not use synthetic brushes because they will melt. The encaustic medium can be heated in an electric cooking pot or in metal dishes on an electric griddle. You will also need a thermometer to keep the medium between 160 and 220 degrees Fahrenheit. Alternatively, you can use an iron or propane torch to fuse the layers of wax.
To writing with encaustic, you must writing in layers and fuse each layer. After melting your encaustic medium to the right temperature of about 200 F, quickly brush a light layer of encaustic medium onto the surface you want to writing; it is best to use a small piece of wood to begin with. Let the wax cool.
When it is hardened, fuse it lightly with a heat gun, just until the wax begins to melt. Move the heat gun quickly and evenly over the wax until the entire surface has just begun to turn shiny, but not runny. Let the fused wax cool. writing another layer and repeat the fusing steps. This will give your substrate a good foundation of wax.
Next, add pigment to small dishes of encaustic medium, applying them to your writing. Let the heat gun move the wax around, or drip wax randomly onto other colors. Always fuse between each layer. You can scrape the layers or incise lines into them with a sharp tool. Your encaustic writing will be finished when you are satisfied with the outcome. Fusing is always the last step between layers.
The ancient encaustic writings are just as vivid today as they were centuries ago. Artists today are newly discovering the unpredictable and intriguing qualities of encaustic writing. There has been an increase in encaustic writing as more artists writing in the abstract style with a medium that is translucent, elusive, and mysterious.